Configuration

Information about the different configuration properties the Spark connector either expects or allows to set.

All couchbase-specific properties start with the spark.couchbase prefix. They can all be configured on the SparkSession like the following:

val spark = SparkSession
  .builder()
  .config("PROPERTY-KEY", "PROPERTY-VALUE")
  .getOrCreate()

Required Properties

Three properties are required to get the connector up and running:

Table 1. Required Config Properties
Property	Description
spark.couchbase.connectionString	The connection string / hostnames of the cluster
spark.couchbase.username	The name of your RBAC user
spark.couchbase.password	The password of your RBAC user

For example:

val spark = SparkSession
  .builder()
  .appName("Migration")
  .config("spark.couchbase.connectionString", "127.0.0.1")
  .config("spark.couchbase.username", "user")
  .config("spark.couchbase.password", "pass")
  .getOrCreate()

Optional Properties

There are other properties which can be provided that alter the workflow, for example by providing implicit bucket, scope or collection names.

Table 2. Optional Config Properties
Property	Description
spark.couchbase.implicitBucket	Used as a bucket, if no explicit name provided on the operation.
spark.couchbase.implicitScope	Used as a scope, if no explicit name provided on the operation.
spark.couchbase.implicitCollection	Used as a collection, if no explicit name provided on the operation.
spark.couchbase.waitUntilReadyTimeout	The time until the SDK waits to make sure all connections are properly established (1 minute default).

The implicit values are always used if no explicit Keyspace or option override is provided on an operation.

Dynamic Configuration Properties

In addition to configuring the connector, it is also possible to configure the underlying SDK properties. Usually the SDK provides a rich builder to do so, but since spark only allows to provide string properties the approach is a bit less flexible.

The strategy is similar to configuring the SDK through system properties or connection string values. Properties are taken as a string value and then decoded into the target format.

For example to configure the KeyValue timeout, the following property can be used:

Key: "spark.couchbase.timeout.kvTimeout"
Value: "10s"

Or to set the certificate path:

Key: security.trustCertificate
Value: mycert.pem

Please refer to the SDK documentation for the possible keys or values.

Connecting to multiple Clusters

This feature is only available with Spark Connector 3.3.0 and later.

It is possible to connect to more than one Couchbase Cluster when using the Spark Connector.

To create more than one connection, a custom identifier prefixed by : needs to be provided at configuration time. The following examples configures a default environment that is always used and a westcoast environment that needs to be explicitly specified when performing an operation:

val spark = SparkSession
  .builder()
  .appName("MultipleClsuterConnections")
  .config("spark.couchbase.connectionString", "hostname1")
  .config("spark.couchbase.username", "username")
  .config("spark.couchbase.password", "password")
  .config("spark.couchbase.connectionString:westcoast", "westcoasthost")
  .config("spark.couchbase.username:westcoast", "westcoastuser")
  .config("spark.couchbase.password:westcoast", "westcoastpassword")
  .getOrCreate()

When performing an operation (like querying a DataFrame), an option can be provided to use the custom connection instead of the default one.

This will use the default connection:

val airports = spark.read
  .format("couchbase.query")
  .load()

Setting the QueryOptions.ConnectionIdentifier option will override the default connection based on the identifier provided.

val airports = spark.read
  .format("couchbase.query")
  .option(QueryOptions.ConnectionIdentifier, "westcoast")
  .load()

On RDD operations additional arguments are provided to achieve the same:

spark.sparkContext
  .couchbaseGet(Seq(Get("airline_10"), Get("airline_10642")), connectionIdentifier = "westcoast")
  .collect()

The same connection identifier mechanism works for dynamic properties (described earlier).

TLS Connections

TLS connections can be confiugred through SDK properties shown above, but there is an alternative way that aligns with configuring TLS in spark itself. The following properties are recognized and if enabled used to connect to a Couchbase cluster encrypted:

Table 3. TLS Config Properties
Property	Description
spark.ssl.enabled	if TLS/SSL should be enabled
spark.ssl.keyStore	the path to the jvm keystore
spark.ssl.keyStorePassword	the password of the jvm keystore
spark.ssl.insecure	Uses the InsecureTrustManager and accepts all certificates. This should only be used during development!

Note that the prefix for these properties is not spark.couchbase but spark.ssl, since they are spark-generic properties.